flash_prepare_pi_zero_image

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision		 Previous revision
flash_prepare_pi_zero_image [2020/02/16 14:15] – created wf68spefflash_prepare_pi_zero_image [2021/07/16 20:21] (current) – wf68spef
Line 1: Line 1:
 Each camera in the plane is driven by a pi zero. There is a prepared image for this usecase, but some planespecific parameters need to be set for each image.   Each camera in the plane is driven by a pi zero. There is a prepared image for this usecase, but some planespecific parameters need to be set for each image.  
  
-  * Unordered List Item Download image from Gitlab: https://gitlab.com/searchwing/development/searchwing-pi-gen +  * Follow instructions from https://kidslab.gitbook.io/searchwing/preparing-components/software-setup/setup-companion-computer
-  * Flash image to SD Card (e.g. using Etcher Tool) +
-  * Set HostName to a unique name in ''/etc/hostname''  and in ''/etc/hosts'' : e.g. Freddy-cam-l +
-  * Set Accesspoint depending on left / right camera in ''/etc/wpa_supplicant/wpa_supplicant.conf'' : +
-<code> +
-network={ +
-        ssid="AP1" +
-        psk="AP-Password" +
-} +
-</code> +
-  * Insert image into plane and power up +
-  * You can access each camera via its hostname: ssh searchwing@Freddy-cam-l.local +
-  * The recorded images can be checked via webbrowser: e.g. http:\\Freddy-cam-l.local +
-  * Preflightcheck can be done with the searchwing-pi-manager: +
  • flash_prepare_pi_zero_image.1581858959.txt.gz
  • Last modified: 2020/02/16 14:15
  • by wf68spef