Differences

This shows you the differences between two versions of the page.

--- vcae-lubuntu-18.04 [2019/03/27 16:36] – created beckmanf
+++ vcae-lubuntu-18.04 [2020/03/22 23:20] (current) – CXXABI_1.3.9 problem beckmanf
@@ Line 1: / Line 1: @@
-===== Install Quartus 18.1 on Lubuntu 18.04 LTS =====
+===== Install Quartus 18.1 and Matlab =====
+This description assumes that version 13.0sp1 is already installed on Lubuntu 18.04. The Quartus 18.1 version is used only by the Master Course.
 ==== Download ====
-Download [[https://www.hs-augsburg.de/~beckmanf/restricted/Quartus-lite-18.1.0.625-linux.tar|Quartus-lite-18.1.0.625-linux.tar]] from [[http://fpgasoftware.intel.com/?edition=lite|Intel]]
+Download [[https://www.hs-augsburg.de/~beckmanf/restricted/Quartus-lite-18.1.0.625-linux.tar|Quartus-lite-18.1.0.625-linux.tar]] from [[http://fpgasoftware.intel.com/?edition=lite|Intel]]. You can download with
+<code>
+cd
+cd cae
+wget --user=YOURUSERNAME --ask-password  https://www.hs-augsburg.de/~beckmanf/restricted/Quartus-lite-18.1.0.625-linux.tar
+</code>
+==== Install ====
+Check that you have
+  * [[http://www.hs-augsburg.de/homes/beckmanf/dokuwiki/doku.php?id=ubuntu_virtual_cae_system#missing_libpng12|Installed the missing libpng12]]
+Make sure that you install the software at "/opt/altera/18.1". When you run the installation, you can deselect all FPGA device families, except Cyclone V.
+<code>
+tar -xvf Quartus-lite-18.1.0.625-linux.tar
+./setup.sh
+</code>
+Check that you have
+  * [[http://www.hs-augsburg.de/homes/beckmanf/dokuwiki/doku.php?id=ubuntu_virtual_cae_system#fix_the_libfreetype_problem|Compiled the libfreetype library]]
+and copy the library to the 18.1 directory
+<code>
+mkdir /opt/altera/18.1/modelsim_ase/lib32
+cp ~/cae/freetype-2.8.1/objs/.libs/libfreetype.so* /opt/altera/18.1/modelsim_ase/lib32/
+</code>
+Change /opt/altera/18.1/modelsim_ase/vco  file and find the location:
+<code>
+dir=`dirname "$arg0"`
+</code>
+After that line add
+<code>
+export LD_LIBRARY_PATH=/opt/altera/18.1/modelsim_ase/lib32
+</code>
+and [[http://www.hs-augsburg.de/homes/beckmanf/dokuwiki/doku.php?id=ubuntu_virtual_cae_system#fix_linux_rh60_vco_script_problem|Fix linux rh60 problem]] in that file.
+=== libstdc++ CXXABI_1.3.9 problem ===
+The following problem
+<code>
+/opt/altera/version/quartus/linux64/libstdc++.so.6: version `CXXABI_1.3.9' not found (required by /usr/lib/x86_64-linux-gnu/libproxy.so.1)
+Failed to load module: /usr/lib/x86_64-linux-gnu/gio/modules/libgiolibproxy.so
+</code>
+is due to different libstdc++ versions which have different ABI versions. If you delete
+<code>
+rm /opt/altera/18.1/quartus/linux64/libstdc++.*
+</code>
+then quartus will find the default libstdc++ in /usr/lib/x86_64-linux-gnu.
+==== Create a version switcher for the PATH variable ====
+You can set the PATH variable as in the 13.0sp1 installation in .profile. If you install two versions, then you can append the following to .bashrc
+<code>
+alias v13="ln -rsvfT /opt/altera/13.0sp1 /opt/altera/version"
+alias v18="ln -rsvfT /opt/altera/18.1 /opt/altera/version"
+</code>
+You need to open a new bash to make the changes active. Then you can switch between the versions by running v18 or v13.
+===== Matlab =====
+==== License and Activation ====
+Students of Hochschule Augsburg can have a [[https://www.hs-augsburg.de/Rechenzentrum/Matlab-TAH-Lizenz.html|license]] but they need to [[https://de.mathworks.com|Create a student account at Mathworks]]. You must use your hs-augsburg.de email address.
+==== Download ====
+Download Matlab version R2018b from https://de.mathworks.com/downloads/web_downloads/
+==== Install ====
+<code>
+cd
+cd cae
+mkdir matlab
+mv ../Downloads/matlab_R2018b_glnxa64.zip matlab
+cd matlab
+unzip matlab_R2018b_glnxa64.zip
+sudo mkdir /opt/matlab
+sudo chown caeuser:caeuser /opt/matlab
+./install
+</code>
+During the installation process you have to login to Mathworks and activate the license. Choose as installation directory:
+<code>
+/opt/matlab/R2018b
+</code>
+Select the following matlab toolboxes
+  * MATLAB 9.5
+  * Simulink 9.2
+  * DSP System Toolbox
+  * Filter Design HDL Coder
+  * Fixed-Point Designer
+  * HDL Coder
+  * MATLAB Coder
+  * Signal Processing Toolbox
+=== PATH ===