Demo: PV Power vs. Crank
To demonstrate the power output of a PV module under artificial irradiation, this output is compared with a mechanically generated power output. This comparison is conducted both visually and through a practical application.

Demo: PV Power vs. Crank
Degree Program
ET - Discontinued
Project Description
To demonstrate the power output of a PV module under artificial irradiation, this output is compared to a mechanically generated power output. This comparison is conducted both visually and through a hands-on application.
The project is intended for use at public events and college open houses to demonstrate the performance of a PV module to a general audience. The project is well-suited for public events due to its interactive nature.
Participants generate the mechanical power—which is compared to the power output of the PV module—themselves by operating the built-in hand crank. Since simply stating the power output of a PV module in numerical terms is not meaningful to a layperson, this project will conduct the comparison purely on a quantitative basis. At the same time, the evaluation is dynamic, meaning that the effect of tilting the PV module or turning the hand crank more vigorously is immediately apparent in the visual and practical evaluations.
On the one hand, the evaluation is based on a visual component. Using separately controlled LED strips for the two power levels, histograms are generated that illustrate the relationship between the two power levels. The maximum display value is scaled to the maximum power output of the PV module under ideal irradiation conditions. Additionally, two identical fans are operated at these power levels. This allows the user of the product to directly feel the difference between the various power levels.
People Involved
Student group: Dominik Böhler, Anna Dorn, Thomas Kastl
Advisor: Prof. Dr.-Ing. Christine Schwaegerl
Course
Systems Engineering 1 (IK)
Duration
Winter Semester 2024/25
Requirements
- Demonstration of a PV module's power output using mechanically generated power
- Interactive usability of the product
- Easy portability to ensure use at public events or in school classrooms
- Movable mounting of the PV module to allow manual adjustment of the angle of incidence
- Visual and hands-on demonstration of performance
- Easy to understand for use by a non-technical audience
- Visibility of all components necessary for understanding the product, such as the radiator, the PV module, the hand crank, the LED strips, and the fans
Implementation
The central components of the product are two microcontrollers that correlate the measured voltages—generated by turning the hand crank and by shining light on the PV module—and, depending on the voltage level, adjust the size of the LED bars and control the fans.
The mechanical power generated by the hand crank is converted into electrical energy via a DC generator. This electrical energy is fed to the microcontroller via a load resistor and a voltage divider. The ADC converter integrated into the microcontroller generates a digital value. The power generated by the PV module can also be fed directly to the microcontroller via a separate load resistor and voltage divider.
The LED strips and fans are each designed to reach their maximum output (all LEDs lit or maximum speed) when the PV module is producing its maximum power. Based on this specification, the graphical and visual representation of the hand crank’s power output is configured within the microcontroller.
The demonstration components are then controlled individually via the software. The LEDs can be easily connected to the microcontroller and require only a series resistor. The fans are controlled using the microcomputer’s pulse-width modulation and speed control based on the measured voltage.
A relay ensures that the fans are turned off when no power is being generated
and, in this case, do not rotate at their minimum speed.
Uses
The product is primarily designed for use with a non-technical audience and is therefore structured to be easy to understand. The analysis does not provide abstract numbers, but rather a visual quantitative comparison and a practical demonstration. At the same time, the product is designed to be interactive, which also appeals to a younger audience.
Specific applications include study information days at the Technical University of Applied Sciences Augsburg or public events such as trade shows. The product can also be used in school classrooms to spark students’ enthusiasm for technical careers. This application is particularly well-suited because students can operate the product themselves. The simple visual and practical comparisons of performance help students understand how a PV module works. In addition, different angles of irradiation can be simulated by tilting the rotatable PV module. At the same time, the product fosters a competitive spirit—encouraging students to generate more mechanical power than the PV module—which boosts their motivation.
The video shows the product in use and illustrates the comparison between the PV module's output and the mechanically generated power.










