Development of a Digital Twin for a Workplace Using Collaborative Robotics in the Skilled Trades
Performing the same boring tasks over and over again—and with fewer and fewer employees? To give an idea of how robots might help in this situation, Konrad Kellner developed a simulation environment as part of his bachelor’s thesis at THA. This environment not only allows for the visualization of the example “tire changes at auto repair shops,” but it can also be used simultaneously for virtual commissioning.

Development of a Digital Twin for a Workplace Using Collaborative Robotics in the Skilled Trades
Degree Program
ET - Discontinued
Project Description
Performing the same boring tasks over and over again—and with fewer and fewer employees? To give an idea of how robots might help in this situation, Konrad Kellner developed a simulation environment as part of his bachelor’s thesis at THA. This environment not only visualizes the example of “tire changes at auto repair shops,” but can also be used simultaneously for virtual commissioning.
People Involved
Konrad Kellner
Moritz Schmidt
Advisor: Prof. Dr.-Ing. Claudia Meitinger
Against the backdrop of monotonous and, in some cases, physically demanding work, this bachelor’s thesis developed a digital twin for a collaborative use case in the skilled trades. The task of changing tires in an auto repair shop was used as an example scenario for a collaborative use case. In this scenario, a collaborative robot (cobot) is designed to handle the mounting and removal of the tires, while the mechanics loosen and tighten the lug nuts. The goal is to reduce the physical strain on the workers.
The development of the digital twin addresses two objectives: First, it aims to strengthen users’ acceptance of and trust in working with collaborative robots. This is to be achieved through a high-quality visualization of the processes, allowing users to immerse themselves in the usage scenario. Second, the digital twin is intended to create an environment in which a virtual commissioning of the components can take place. There, it should be possible to check the robot’s programming in advance and make any necessary improvements.
To achieve the above-mentioned goals, the digital twin’s simulation environment was developed using NVIDIA’s Isaac Sim software. Isaac Sim provides high-quality visualization of the simulation. This allows users to immerse themselves in a workshop-like environment and get a first sense of what it’s like to work with collaborative robots. In addition, Isaac Sim creates an environment in which the virtual commissioning of the cobot can take place. The UR10e from Universal Robots is used as the cobot, which is programmed using ROS 2 (Robot Operating System). The cobot’s control system, implemented within the platform, autonomously plans a path based on specified waypoints and collision-avoidance zones generated from camera data. This path is then translated into a robot motion, which is in turn visualized in Isaac Sim.
The video illustrates a virtual simulation of a skilled trades workplace and the interaction between humans and collaborative robots.







