Solder Paste Stencil Alignment Device
In this device, the solder paste stencil and the circuit board can be securely clamped in place and aligned with each other, making it easy to apply the solder paste. The alignment is controlled automatically by a camera and motors.

Solder Paste Stencil Alignment Device
Degree Program
ET - Discontinued
Project Description
Modern printed circuit boards primarily use SMD (surface-mounted) components, rather than through-hole components. Soldering by hand with a soldering iron is extremely inefficient and imprecise due to the very small size of the components and the large number of them.
Solder paste is applied to the contact points on the printed circuit board. The components are then placed on top of the paste and heated in a reflow oven, causing them to be soldered in place.
Until now, solder paste was applied manually by hand, or a stencil was positioned by hand and then the solder paste was applied. However, these methods are too imprecise and require a great deal of labor.
In this device, the stencil and the circuit board can be securely clamped and aligned with each other, making it easy to apply the solder paste. In addition, a camera is mounted above the device, which detects the relative positions of the circuit board and the stencil and automatically aligns them using motors.
No in-depth technical knowledge is required to operate the device.
People Involved
Student group: Annika Becherer, Matthias Faul, Ben Goff
Advisor: Prof. Dr.-Ing. Christoph Zeuke
Course
Systems Engineering 1 (IK)
Duration
Winter Semester 2024/25
Requirements
- The circuit board and stencil must be clamped into the device.
- Maximum PCB size: 233.35 x 160 mm (double Euro format).
- Maximum stencil size: 460 x 350 mm.
- The circuit board and stencil should be alignable with each other.
- Manual and automatic alignment
Implementation
The assembly consists of:
- A template holder (profiles, locking levers and screws, sliders)
- Circuit board mounting and alignment mechanism (stepper motors, precision spindle, linear rail, mounting plate, and magnetic holder)
- Automation components (Raspberry Pi 5, camera and lens, screen with keyboard)
Dimensions:
- Width 685 mm x Height 800 mm x Depth 570 mm
The software is written in Python, and the main image processing library is OpenCV.
Uses
As soon as the process is started, the user interface launches. Here, you can choose whether to perform manual or automatic alignment.
In manual alignment, the camera image is displayed, and the motors are controlled via the keyboard.
With automatic alignment, an image of the stencil is first captured, followed by an image of the circuit board. These two images are then converted to black-and-white. In this process, the holes in the stencil and the solder pads on the circuit board appear white, while everything else appears black.
The system then automatically selects an area on the stencil, which is subsequently matched to the corresponding area on the circuit board. The difference values along the x- and y-axes between the two areas are then used to drive the motors.












