Scales for People with Autism
Small-batch development and optimization of an existing scale prototype for the Fritz-Felsenstein-Haus

Placement Machine
Project Description
At the end of the project, a small batch of five redesigned scales was to be delivered to the Fritz-Felsenstein-Haus.
To this end, an existing prototype was analyzed and optimized to meet the challenges of small-batch production.
People Involved
Student group: Stefan Lammel, David Gebser, Benedikt Ott, Sebastian Karl
Advisor: Prof. Dr.-Ing. Martin Bayer
Course
Systems Engineering 1
Duration
Winter Semester 2018/2019
Requirements
The development was based, among other things, on the following requirements, which included optimization requests from the Fritz-Felsenstein-Haus as well as necessary technical modifications following an evaluation of the feasibility of a small production run.
- Five scales are to be manufactured for the Fritz-Felsenstein-Haus
- Housing with carrying handles
- Larger buttons, possibly with engraved labels
- A single keypad to operate the entire scale
- A switch to toggle the display between measurement value entry and the current measurement value
- Non-slip feet for the housing
- Revise the transition between “close” and “far” in the measurement resolution
- The entire scale should consist of only one component
Implementation
A major part of the project involved researching the necessary components and contacting the relevant companies. Due to the relatively long manufacturing and delivery times, careful planning and regular meetings to discuss the current status were necessary in order to respond appropriately and in a timely manner should any complications arise.
Technical changes inside the scale:
- Development of a central circuit board to keep the design compact
- Modification of the speaker (more compact but with the same output)
- Automatic power-on of the scale
- Replacement of the relay board used to control the LEDs with transistors
- Implementation of the RS232-to-TTL converter board on a custom-made circuit board
Since the scale is intended for use in a food-handling environment, a stainless steel housing is used for hygiene reasons. This also ensures the desired stability and robustness. The control panel consists of machine-grade pushbuttons with custom labeling. The precision scale is fully integrated into the housing to keep complexity to a minimum. The remaining external interfaces are:
- LEDs for displaying the traffic-light mode
- Control panel
- Weighing pan of the precision scale
- Buttons for switching between weighing modes
- Acoustic: Speaker
Challenges in small-batch production:
Because the housing was custom-made, one of the challenges was finding a suitable company that was willing to manufacture the housing and whose delivery schedule aligned with the project timeline. Because of the relatively small production volume, collaboration with other companies was virtually impossible, resulting in little to no discounts.
Since additional development work was required on the prototype, it was not possible to conduct a complete functional test until shortly before the deadline.
Uses
With regard to the prototype, the following changes must be taken into account when using it:
- The tare function is activated by the red cancel button on the control panel
- A toggle switch can be used to switch between traffic light mode and caregiver mode (current weight shown on the display).









